Manufacturer
Fulghum Industries Inc.
317 South Main St
Wadley, GA
30477 USA
Quantity:
Year of Manufacture:
2
2014
Description:
Fulghum:
Type:
Net Capacity:
Working Radius:
Track Radius:
Lift Speed:
Trolley Travel Speed:
Swing Speed:
Life Above Rail to Closed Grapple:
Log Storage Height:
Theoretical Log Storage per Crane:
Log Storage Sector Outer Row:
Log Storage Sector Inner ROw:
Total Weight per Unit:
170 Foot 25 Ton Electric Variable Radius Log Handling Cranes.
Variable radius, track supported machine
19 Tons
96′ – 170′ (Trolley travel 74’)
79’ 6-3/16”
0 – 105 FPM
0 – 40 FPM
0 – 1 RPM
Approximately 42’
50’ (dependent on mound configuration)
Up to 18,590 cords based on two (2) rows, 50’ log storage height, 60’ log lengths.
258 deg.
337 deg
260,000 lbs
Click on Image for Larger Version
Manfacturer:
Hoffman Inc. Airoflex
6001 49th St
South Muscantine, Iowa
52761, USA
Description
Year of Manufacture:
Quantity:
2015
1
Description
Airoflex 70 Ton Truck Dumper
10 x 85 ft Platform, 63 Deg Tilt
Various Dumper Options
Drive over Pit door with all options
7,000 cubic ft In Pit receiver
160 T/hr @ 15lbs.ft3
Manufacturer:
Biomass Engineering Equipment
1457 Sunday Dr
Indianapolis, IN
46217, USA
Year of Manufacture:
Quantity:
2014
2
Description:
2 x 25′ long 8 strand, heavy duty log decks
2 x 118′ long, 5′ wide x 30″ deep heavy duty log through.
Manufacturer:
Comact Equipment Inc.
4000 40e Rue Ouest
Saint-Georges, Quebec
G5Y 8G4
Year of Manufacture:
Quantity:
2015
2
Description:
(Q2) Stem Wave Feeders SWF-300
(Q2) Waste Rake Conveyors
(Q2) Variable Frequency Drives
Q2) PLC/Controls
Stem length: Minimum: 8′-0″ Maximum: 60′-0″
Stem diameter: Minimum: 1″ , Maximum: 30″, Average: 20″
Performance: 25 Stems per minute
Manufacturer:
Year of Manufacture:
Quantity:
Prentice
2014
1
Description:
Prentice 2410 ERC Log Loader
Remote Controlled
VIN PR65672
Manfacturer:
Continental Biomass Industries Inc.
22 Whittier St, Newton
NH, 03858, USA
Year of Manufacture:
Quantity:
2014
2
Description:
(Q1) CBI Model 8400 Chipper (1200HP) with Flail Debarker
(Q1) CBI Model 8400 Chipper (1200HP) without Flail Debarker
Both units are complete with infeed, & outfeed conveyors.
Manufacturer:
Jeffrey Rader Canada
135 Boul. Brunswick
Point Claire, Quebec, Canada
H9R 5N2
Year of Manufacture:
Quantity:
2016
1
Description:
Jeffrey Rader Canada Bark Hog
Model 56WBE SS Hog
350 HP
12 Metric T/Hr capacity passing through 3″ square grid
Extensive multi-functional interconnected outside conveyor systems
Manfacturer:
Bruks Rockwood LLC
5975 Shilo Road, suite 109
Alpharetta, GA
30005, USA
Year of Manufacture:
Quantity:
2015
1
Description:
100 T/Hr Reclaim capacity
Max Pile width 37 feet ( without addition of wall)
Storage Capacity is approx 305ft3/Linear Ft without wall
Storage Capacity is approx 400ft3/Linear Ft with wall
Estimated Weight 67,000lbs
Manufacturer:
BM&M Screening Solutions
5465 Production Blvd
Surrey, BC
V3S 8P6
Year of Manufacture:
Quantity:
2014
7
Description:
Q2 BM&M 10′ x 20′ 2CS Green Chip screens
Q3 BM&M 5′ x 12′ 1SS Pellet Screens
Q2 BM&M 5033S1 Dry Grind Screens
Manufacturer:
Andritz Inc.
1115 Northmeadow Prkw
Roswell, GA
300-76-3857, USA
Year of Manufacture:
2014
Description:
Q6 Hammer Mill Model 43606
Q6 400HP, 1800 RPM HM Motors
Q6 Vibration Switch
Q4 Hammer Mill Model 43606
Q4 400HP, 1800 RPN HM Motors
Q4 Vibration Switch
Original Manufacturer:
Thompson Rader
Year of Manufacture:
Year of Upgrade:
Upgrade Company:
1995
2014
Teal Sales Inc (TSI)
20818 44th Ave West, Ste 201
Lynnwood, Washington
98036, USA
Description:
Rader Dryers (2) 18 ft diameter x 60 ft long , originally installed 1995 and configured then for OSB production.
Upgraded 2014, at cost of USD $1.85 Mill, consisted of removing old flighting, install new flighting , upgrade to recycle hot air, thereby improving efficiency, as well as general re-conditioning of units including infeed and outfeed.
Manfacturer:
Andritz Inc.
1115 Northmeadow Prkw
Roswell, GA
300-76-3857, USA
Year of Manfacture:
2014
Description:
Q12 Conditioner Model 18 x 12
Q12 Motor 10 HP, 1200 RPM
Q12 Pellet Mills Model 26LM
Q12 400HP, 1200 RPM PM Motors
Q12 Pellet Mill 26 Centri-feeder
Q12 5HP, 1200 RPM Motor
Q12 Electric hoists
Q3 Tools for Hoist
Q12 Vibration Pad
Q3 Cooler Milpro VC -107P
Q3 Cyclones Milpro Model 2H43& Airlock
Q3 Fans for VC-107P Cooler
Q3 Milpro controler CR-120-P
Manfacturer:
RDR Industrial Contractors
1049 Logan Ave,
Winnipeg ,Manitoba
Year of Manufacture:
Quantity:
2014
5
Description:
Q5
Pellet storage silos
Capacity 420 metric ton each, complete with
Infeed Conveyor, Outfeed Gate, Outfeed Conveyor
Walkways & Handrails.
Manfacturer:
Intersytems International Inc.
9775 N 109th Ave
Omaha, NE
68142, USA
Year of Manufacture:
Quantity:
2014
1
Description:
Load out system comprised of :
Intersystem Garner Scale 210 T/Hr Bulk weigher
Model BMW-105 P45LN3
Complete with Infeed Conveyor
And outfeed Conveyor
Manufacturer:
Schenk Process LLC
810 S Old Hwy 75
P.O. Box 204
Sabetha, KS
66534, USA
Year of Manufacture:
2014
Description:
Q6
Q6
Q6
Q4
Q4
Q4
Q1
Q1
Q3
Q1
Q3
Q3
Q1
MAC Hi Efficiency Centrifigal Collect, Model H51
Multi Duty Rotary airlock, Model MD500
Industrial Exhaust Fan, Model IEAH-261
MAC Hi-Efficiency Centrifugal Collector, Model H54
Multi Duty Rotary Airlock, Model MD 139
Industrial Exhaust Fan, Model IEAH-296
Multi-Duty Rotary Airlock, Model Md139
Pressure Blower Package, Model 525
Multi Duty Rotary Airlock, Model MD75
Lot, 360 ft @ 5″ Sch 304 Stainless, mat conv line
5″ x 90deg x 48″ CLR Flatback Elbow
MAC Blow-Thru Adaptor
Industrial Fan 48,000CFM & 16.5″ WC
Total available Power is 31 Mw
Primary Step Down is 44Kv to 4160v
Secondary Step Down is 4160v to 600v
There are well over $2 Million in spare parts ( at original cost) in stores
List of New Equipment Spares
List of Legacy equipment Spares.
Note: Mobile Equipment only for sale as going concern with property
